Quantum 6-00360-15 manual Sharing Disk Resources

Appendix D Quality of Service Guide

Sharing Disk Resources

Performance counters are not enabled by default in the client. To enable them, you must execute cvdb -P; this toggles the state of collection. To turn off the perfmon counters, do another cvdb -P. To re-enable, again do cvdb -P, and so on. To clear all client counters to zero, disable, then re- enable the counters with cvdb -P.

Sharing Disk Resources

As a final example, consider the case of a full-featured disk subsystem (Redundant Array of Very Expensive Disks, or RAVED) using a very high speed interconnect. Many clients can share these disk arrays, but it is sometimes desirable to limit a client's access to the array. QOS provides a mechanism for political bandwidth management so that no one client can consume all the bandwidth of the channel interconnects.

In such a scenario, the stripe group would always be in real-time mode. Each client would have a token specifying the number of I/Os/sec permissible. In the current version of QOS, it is unfortunately not possible to assign different non-real-time limits to different clients.

The foundation of such an approach is a simple program that puts the stripe group into real-time mode as soon as the FSM is up and servicing requests. An example of such a program is included in the source code for the External API.

Once the stripe group is in real-time mode, the bandwidth as specified in the FSM configuration file is shared by all clients. In cases such as this, the real-time limit (rtios or rtmb) is calculated to be the total bandwidth desired to each client times the number of possible clients.

As each client attempted to access the disk subsystem, it would obtain a token. The FSM would send out callbacks adjusting down the amount of bandwidth available. No one client would be allowed to exceed the threshold specified in the non-real-time token. This assures fairness among all the clients.

StorNext 3.1.3 Installation Guide 152