| Chapter 4 Configuring StorNext |
| Windows Configuration Utilities |
|
|
Field / Button | Description |
|
|
Select Drive - Drive | Select the mapped drive to configure on the |
| other tabs of the Client Configuration utility. |
|
|
Unmap Drive | Select a drive to unmap. |
|
|
Unmap | Click to unmap the selected drive. |
|
|
Display File System | Select to display a notification dialog box if a |
Critical Events to | critical event occurs. |
Desk Top | (Because the dialog box must be manually |
| |
| dismissed, clear this check box for unattended |
| client systems.) |
|
|
Disable SNFS ONC | Select to disable the SNFS portmapper service. |
Portmapper Process | (Disable this service only if a product that |
| |
| provides equivalent functionality is installed, |
| for example, the portmapper installed with |
| Microsoft Services for Unix). |
|
|
Don’t Register with | Select to not register with the SNFS |
ONC Portmapper (port | portmapper service. |
111) |
|
|
|
FS Name Servers
To access a file system, you must first specify the name server (StorNext host) where the file system is located. The first host in the list is the primary name server. Additional hosts are backups for use in the event of a failover.
Use the FS Name Servers tab (figure 38) to specify the primary StorNext host. Table 15 describes the fields on the FS Name Servers tab.
Note: Make sure the host list is the same for all clients on the SAN. An incorrect or incomplete host list may prevent the client from connecting to the file system.
StorNext 3.1.3 Installation Guide | 75 |
