Quantum 6-00360-15 manual Select the Windows user to map to a user ID, Group on the SAN

Chapter 4 Configuring StorNext

Windows Configuration Utilities

user to a user ID and group on the SAN. (Changes are applied when you click Apply. You do not need to restart the client system.)

Use the Authentication tab (figure 39) to specify an authentication method. Table 16 describes the fields on the Authentication tab.

Note: If your StorNext installation is Windows-only and you do not plan to add non-Windows clients, you do not need to specify an authentication method.

Figure 39 Client Configuration:

Authentication

Table 16 Client Configuration:	Field / Button	Description
Authentication
	Windows User	Select the Windows user to map to a user ID
		and group on the SAN.

StorNext 3.1.3 Installation Guide 77