
Chapter 4 Configuring StorNext
Windows Configuration Utilities
Figure 48 Server
Administration
On the Administrator window, do one of the following:
•To connect to an MDC, click File > Connect to. Type the host name and click OK. File systems on the server appear in the left pane.
•To start a file system, click it in the left pane. Click File > Start File System, and then click Start.
•To activate a file system, click it in the left pane. Click File > Activate File System, and then click Activate.
•To stop a file system, click it in the left pane. Click File > Stop File System, and then click Stop.
•To update the list of file systems in the left pane, click View > Refresh.
For more information about viewing and modifying file system properties and quotas, see the following sections:
•File System Properties on page 93
•Stripe Group Properties on page 94
•Quota Properties on page 95
•Quality of Service Information on page 97
•Clients Information on page 97
Note: Do not change settings on the Debug Settings dialog box unless directed to do so by the Quantum Technical Assistance Center.
StorNext 3.1.3 Installation Guide | 92 |