Chapter 2 Installing StorNext File System

Installing StorNext File System on Linux or Unix

Figure 6 Configuration Menu

Performing an Installation Operation

When you first enter the Configuration Menu, it displays recommended locations for StorNext application directories based on the available file systems detected by the installation script. To accept the recommended directory locations and return to the Main Menu, press <Enter>.

Alternately, customize the installation by specifying the file systems where application and support files are stored.

1On the Configuration Menu, type the number that corresponds to the directory location you want to customize (1–6), and then press

<Enter>.

A list of available local file systems is shown.

2To change the file system where the directory is located, type the name of the file system and press <Enter>.

3To confirm the change, type yes and press <Enter>.

To customize additional directory locations, repeat steps 1–3.

4When you are done customizing the installation, press <Enter> to return to the Main Menu.

To install StorNext using the options specified on the Configuration Menu, perform an installation operation.

1On the Main Menu, type 2 and press <Enter>.

The installation script runs (figure 7). The script displays the current progress of the installation.

StorNext 3.1.3 Installation Guide

26

Page 43
Image 43
Quantum 6-00360-15 manual Performing an Installation Operation