Intel MPCMM0001 manual Configuring Ipmi Error Completion Codes, IPMI/IMB Error Message Format

Health Events

Table 50. IPMI Error Completion Codes and Enumerations

Code	Error Message
C0h	“Node Busy”
C1h	“Invalid Command”
C2h	"Command Invalid for Given LUN"
C3h	"Timeout while processing command"
C4h	“Out of space”
C5h	"Reservation Canceled or Invalid Reservation ID"
C6h	"Request Data Truncated"
C7h	"Request Data Length Invalid"
C8h	"Request Data Field Length Limit Exceeded"
C9h	"Parameter Out of Range"
CAh	"Cannot Return Number of Requested Data Bytes"
CBh	"Requested Sensor, Data, or Record not present"
CCh	"Invalid Data Field in Request"
CDh	"Command illegal for specified sensor or record type"
CEh	"Command response could not be provided"
CFh	"Cannot execute duplicated request"
D0h	"Command response could not be provided. SDR Repository in update mode"
D1h	"Command response could not be provided. Device in firmware update mode"
D2h	"Command response could not be provided. BMC initialization or initialization
	agent in progress"
D3h	"Destination unavailable"
D4h	"Cannot execute command.”
D5h	"Cannot execute command. Command, or request parameter(s), not supported in
	present state"
FFh	"Unspecified Error"
01h –	"OEM Error"
7Eh

11.5.1Configuring IPMI Error Completion Codes

A configuration parameter is available to allow for the enhanced IPMI error code reporting. A new configuration variable “IMBErrorCodeReporting” is defined in /etc/cmm.cfg file. It will have two values 0 (disabled) and 1 (enabled). The default value of “IMBErrorCodeReporting” is disabled

(0). To turn on the enhanced IPMI error code reporting, the “IMBErrorCodeReporting” variable should be set to 1.

11.5.2IPMI/IMB Error Message Format

When “IMBErrorCodeReporting” is set to 0 in /etc/cmm.cfg, the current error message is displayed whenever IMB completion error occurs:

MPCMM0001 Chassis Management Module Software Technical Product Specification 121