Intel MPCMM0001 manual Cmm Location 1.3.6.1.4.1.343.2.14.2.10.3 Sheet 3

SNMP

Table 63. Cmm Location (1.3.6.1.4.1.343.2.14.2.10.3) (Sheet 3 of 3)

OID	Object	Syntax	Access	Value
				Perform the CMM firmware update. The
44	cmmUpdate	DisplayString	write	set value is in the following format:
				<cmm image location> ftp:<hostname
				or IP address>:username:password.
				This allow the user to set the runtime to
45	cmmResetAirFilterRuntime	INTEGER	write	zero when the filter is replaced. 1 -
				reset, other value no change.
46	cmmAirFilterRunTimeLimit	DisplayString	read-write	Returns the upper critical limit. Refer to
				CLI section for more info.
				Get/Set whether the LED state is
47	cmmSyncuserledstate	DisplayString	read-write	synced between the active and the
				standby CMM. “Yes” or “No”.
				Used to customize the login screen
48	cmmLoginMessage	DisplayString	read-write	message by allowing the user to add
				the OEM name.
				Used to customize the bash prompt by
49	cmmCmdLinePrompt	DisplayString	read-write	allowing the user to add the OEM
				name.
50	standbyCMMReboot	INTEGER	read-write	Used to reboot the standby CMM. 1 -
				Reboot
55	cmmIPMICommandRequest	DisplayString	read-write	Used to send any IPMI command to this
				location.
56	cmmIPMICommandResponse	DisplayString	read-only	Used to read the response to the above
				IPMI command.
				Get/Set of the failover on redundancy
57	cmmFailoverOnRedundancy	DisplayString	read-write	flag.Settable values are: 'automatic' or
				'manual'
				Get/Set the User Scripts
58	cmmSyncUserScripts	DisplayString	read-write	Synchronization flag.Settable values
				are: 'equal' or 'upgrade' or 'downgrade'
				or 'always'"
59	cmmTemperatureLevel	DisplayString	read-only	Used to get the temperature level of the
				system.
62	cmmSNMPTrapFormat	INTEGER	read-write	Get/Set SNMP trap format.
				1 - text, 2 - raw, 3 - text + raw
	cmmSNMPSendUnrecognized			Get/Set
63		INTEGER	read-write	SNMPSendUnrecognizedEvents.
	Events
				0 - disable, 1 - enable
64	cmmSELFormat	INTEGER	read-write	Get/Set SEL format.
				1 - text, 2 - raw, 3 - text + raw
	cmmSELDisplayUnrecognized			Get/Set
65		INTEGER	read-write	SELDisplayUnrecognizedEvents.
	Events
				0 - disable, 1 - enable

148MPCMM0001 Chassis Management Module Software Technical Product Specification