Intel MPCMM0001 manual Bist Event Strings Sheet 2, Chassis Data Module CDM 1,2, Datasync Status

Health Events

Table 43. BIST Event Strings (Sheet 2 of 2)

	Event String	Event Code				Event Severity
		Hex			Decimal
	“Update of /etc failed.”	0x0A4	164			Critical
	“Restore of /etc files failed.”	0x0A5	165			Critical
	“Software update failed.”	0x0A6	166			Critical
	“FPGA re-programmed 2 times and no further lockup detected.”	0x0B4	180			Minor
	“FPGA re-programmed 3 times and no further lockup detected.”	0x0B5	181			Minor
	“FPGA re-programming has failed.”	0x0B6	182			Critical
	“FPGA re-programmed more than 3 times and lockup still	0x0B7	183			Critical
	detected.”
	“Dynamic FLASH image corruption detected.”	0x0B8	184			Critical
	“Static Redboot image is corrupt.”	0x0B9	185			Critical
	“Static BlueCat image is corrupt.”	0x0BA	186			Critical
	“Static FPGA image is corrupt.”	0x0BB	187			Critical
	"CPLD firmware outdated."	0x0BC	188			Minor
	"RTC battery power lost."	0x0BE	189			Critical
	"I2C failure while reading RTC."	0x0BF	190			Critical
	"PBI frequency was not 33MHz. Now recovered after the reset."	0x0150	336			OK
sa
Table 44. Chassis Data Module (CDM [1,2])
	Event String	Event Code				Event Severity
		Hex			Decimal
	“Removed”	0x0120		288		OK
	"Inserted"	0x0121		289		OK
Table 45. Datasync Status
	Event	Event Code				Event Severity
		Hex			Decimal
	“Initial Data Synchronization complete”	0x420			1056	OK
Table 46. CMM Status Event Strings (CMM Status)
	Event String	Event Code				Event Severity
		Hex			Decimal
	“CMM is not ready.”	0x400			1024	Minor
	“CMM is ready.”	0x401			1025	OK

118MPCMM0001 Chassis Management Module Software Technical Product Specification