Intel MPCMM0001 manual Process Integrity Interval, Chassis Applicability, PmsPieSnmp Command Line

Process Monitoring and Integrity

6.10.5Process Integrity Interval

This is the interval in seconds between executions of the PIE.

Values: 0 - 65535, where 0 indicates that the PIE only gets executed once.

Default: 3600.

ProcessIntegrityInterval = 3600

6.10.6Chassis Applicability

This is a list of chassis types on which this particular Pie should be run. The list is comma delimited. Spaces are ignored. If this key is not present, then the Pie will run on all chassis.

Values: MPCHC0001, ZT5085, MPCHC5085, ZT5088, MPCHC5088, ZT5089, MPCHC5089, ZT5090, MPCHC5090, ZT5091, MPCHC5091.

ChassisApplicability = MPCHC0001, ZT5085, MPCHC5085, ZT5088, MPCHC5088, ZT5089, MPCHC5089, ZT5090, MPCHC5090, ZT5091, MPCHC5091

6.10.7PmsPieSnmp Command Line

The command line usage of PmsPieSnmp is:

PmsPieSnmp [-f SuccessiveFailureNumber]

where:

-f : This is the number of allowed successive integrity failures before the PMS performs recovery on the faulting process. PMS performs recovery on "this number + 1".

Values: 1 - 100. Default = 3

For Example

PmsPieSnmp

PmsPieSnmp -f2

PmsPieSnmp -f 2

6.10.8SNMP PIE Section of pms.ini

[PmsPie176]

ProcessIntegrityExecutable = ./PmsPieSnmp -f2

UniqueID = 176

AdminState = 1

ProcessIntegrityInterval = 300

66MPCMM0001 Chassis Management Module Software Technical Product Specification