Intel MPCMM0001 manual Cmm Mib, MIB Design, MIB Tree, MIB II Objects System Group

SNMP

17.1CMM MIB

The CMM comes with a text file (mpcmm0001.mib) that describes the CMM and platform objects to be managed. A remote application such as an SNMP/MIB manager can compile and read this file and utilize this information to manage the sensor devices on CMM, chassis, and server blades currently present. The mpcmm0001.mib is located in the /usr/local/cmm directory in the CMM. Users can utilize FTP or RCP to get this file from the CMM.

17.2MIB Design

The CMM supports the following MIB II objects. The writeable objects can be set in their respective fields in the /etc/snmpd.conf file. Only the objects described in this section can be customized for the CMM. Other unlisted MIB II objects will work.

Table 58. MIB II Objects - System Group

Object	Syntax	Access	Value
			“Linux mpcmm0001 2.4.2-1 #156 [DATE]
sysDscr	DisplayString	read-only	armv5”
			Date is the actual current date.
			iso(1).org(3).dod(6).internet(1).private(4).e
sysObjectID	OBJECT	read-only	nterprises(1).intel(343).products(2).Server-
	IDENTIFIER		Management(10).Chassis-
			Management(3).mpcmm0001(2)
sysContact	DisplayString	read-write	max. 128 bytes
sysName	DisplayString	read-write	Default:”mpcmm0001”
sysLocation	DisplayString	read-only	max. 128bytes

Table 59. MIB II - Interface Group

Object	Syntax	Access	Value
ifDscr	DisplayString	read-only	10/100BASE-TX

17.2.1MIB Tree

The MIB tree representing the locations of the custom MIB is shown in Figure 4, “CMM Custom MIB Tree” on page 142.

Next to each object is the object identifier number in parentheses () for each object in the MIB tree. For example, using the tree below it can be calculated that the full OID for blade16 location on the CMM is 1.3.6.1.4.1.343.2.14.2.10.4.16 by starting at the top of the tree and following the numbers down to blade16.

MPCMM0001 Chassis Management Module Software Technical Product Specification 141