Intel MPCMM0001 Configuring Ipmi Command Privileges, Ipmi Commands Supported by CMM Rmcp Sheet 3

RMCP

Table 89. IPMI Commands Supported by CMM RMCP (Sheet 3 of 3)

Command Type	Defined In	Command
		Get PICMG Properties
		Get Address Info
		Get Shelf Address Info
		Set Shelf Address Info
		FRU Control
		Get FRU LED Properties
		Get LED Color Capabilities
		Set FRU LED State
AdvancedTCA™	PICMG 3.0 Spec	Get FRU LED State
		Set IPMB State
		Set FRU Activation Policy
		Get FRU Activation Policy
		Set FRU Activation
		Get Device Locator Record ID
		Get Port State
		Set Power Level
		Get Power Level

20.10Configuring IPMI Command Privileges

The cmdPrivillege.ini file located in the /etc directory of the CMM allows the configuration of privileges allowed for each IPMI command on the CMM.

Note: The CMM or cmd_hand must be restarted for the changes to the cmdPrivillege.ini to take effect.

The format of the file is as follows:

[IPMI]

NumNetFunc=23

NetFunc[Net Function1]=[Net Function Name 1]

NetFunc[Net FunctionN]=[Net Function Name N]

[Net Function Name 1]

NumCMD=Y

[Command Byte 1]=[Privelege Level] [Command Byte Y-1]=[Privelege Level]

Where:

196MPCMM0001 Chassis Management Module Software Technical Product Specification