Intel MPCMM0001 manual Error and Return Codes for the RPC Interface Sheet 1

Remote Procedure Calls (RPC)

Table 80. Error and Return Codes for the RPC Interface (Sheet 1 of 4)

Code #:	Error Code String	Error Code Description
0	E_SUCCESS	Success
1	E_BPM_BLADE_NOT_PRESENT	Blade isn't in the chassis.
2	E_ECMM_SVR_COMMAND_UNSUPPORTED	ECMM_SVR: Unsupported Command
		Error.
3	E_CLI_MSG_SND	CLI Send Message Error.
4	E_CLI_INVALID_TARGET	Not a valid -t parameter.
5	E_CLI_INVALID_LOCATION	Not a valid -l location.
6	E_CLI_INVALID_DATA_ITEM	Not a valid -d parameter.
7	E_CLI_INVALID_SET_DATA	Not a valid -v parameter.
8	E_CLI_INVALID_REQUEST	CLI Invalid Request Error.
9	E_CLI_MSG_RCV	CLI Receive Message Error.
10	E_CLI_NO_MORE_DATA	No data found to retrieve.
11	E_CLI_DATA_TYPE_UNSUPPORTED	CLI Data Type Unsupported.
12	E_ECMM_CLIENT_CONNECT_ERROR	ECMM_CLIENT: RPC Connect Error.
13	E_ECMM_SVR_AUTH_CODE_FAIL	Invalid auth code passed to RPC interface.
14	E_CLI_STANDBY_CMM	Operation cannot be performed on standby
		CMM.
15	E_WP_INITIALIZING	The CMM is Initializing and Not Ready.
		Wait a few seconds and try again.
16	E_BPM_NON_IPMI_BLADE	Blade does not support IPMI.
17	E_BPM_STANDBY_CMM	BPM operation cannot be performed on
		standby CMM.
18	E_BPM_NO_MORE_DATA	Couldn't delete a board from the drone
		mode list.
19	E_BPM_INVALID_SET_DATA	Not a valid -v parameter.
20	E_CLI_INVALID_BUFFER	Internal CMM Error
21	E_CLI_INVALID_CMM_SLOT	Internal CMM Error
22	E_CLI_NO_MSGQ_KEY	Internal CMM Error
23	E_CLI_NO_MSGQ	Internal CMM Error
24	E_CLI_NO_MSGQ_LOCK	Internal CMM Error
25	E_CLI_NO_MSGQ_UNLOCK	Internal CMM Error
26	E_CLI_FILE_OPEN_ERROR	Internal CMM Error
27	E_CLI_CFG_WRITE_ERROR	CMM Config File Error.
28	E_IMB_NO_MSGQ	Internal CMM Error
29	E_IMB_NO_MSGQ_KEY	Internal CMM Error
30	E_IMB_SEND_TIMEOUT	Internal CMM Error
31	E_IMB_DRIVER_FAILURE	Internal CMM Error
32	E_IMB_REQ_TIMEOUT	A blade is not responding to IPMI requests.
33	E_IMB_RECEIVE_TIMEOUT	A blade is not responding to IPMI requests.

MPCMM0001 Chassis Management Module Software Technical Product Specification 177