Intel MPCMM0001 Error and Return Codes for the RPC Interface Sheet 4, Ewpthresholdunsupported

Remote Procedure Calls (RPC)

Table 80. Error and Return Codes for the RPC Interface (Sheet 4 of 4)

Code #:	Error Code String	Error Code Description
100	E_SNMP_CMD_UNSUPPORTED	Internal CMM Error.
101	E_SNMP_ERROR	Internal CMM Error.
102	E_SNSR_VALUE_OUT_OF_RANGE	Internal CMM Error.
103	E_SNSR_AUTH_ERROR	Internal CMM Error.
104	E_WP_INITIALIZE_LIBS	Internal CMM Error.
105	E_WP_CFG_READ_ERROR	CMM config file may be corrupted.
106	E_WP_CFG_WRITE_ERROR	CMM config file may be corrupted.
107	E_WP_THRESHOLD_UNSUPPORTED	The sensor being queried doesn't support a
		particular threshold.
108		The sensor doesn't support a "current”
	E_WP_INVALID_TARGET	value. This happens when querying a
		current value on a discrete sensor type.
109	E_WP_INVALID_LOCATION	Not a valid -l location.
110	E_WP_INVALID_DATA_ITEM	Not a valid -d parameter.
111	E_WP_INVALID_SET_DATA	Not a valid -v parameter.
112	E_WP_CMD_UNSUPPORTED	Not a supported command.
113	E_WP_STANDBY_CMM	Can't execute this command on the
		standby CMM.
114	E_WP_I2C_ERROR	Internal CMM Error.
115	E_FT_SEM_GET_FAILURE	Internal CMM Error.
116	E_DRONE_NOT_FOUND	Internal CMM Error.
117	E_INTERNAL_ERROR	Internal CMM Error.
118	E_BPM_PWR_SUPPLY_NOT_PRESENT	Internal CMM Error
119	E_NEM_INTERNAL_FAILURE	Internal CMM Error.
120	E_WP_CMM_RESET	CMM Reset.
121	E_UPDATE_INPROGRESS	Firmware update in progress.
122	E_CLI_INVALID_GET_DATA_ITEM	Not a valid getdataitem.
123	E_CLI_INVALID_SET_DATA_ITEM	Not a valid setdataitem.
124	E_SNSR_UPDATE_INPROGRESS	Sensor update in progress.
125	E_WP_SNSR_EVN_DESCRIPTION_NOT_FOUND	Sensor event description not found.

Note: Error codes 100 and 101 will never be returned by the CMM when using RPC. If you receive these error codes, they are most likely being returned by the RPC client. Consult your RPC client documentation or code to find the description of these errors.

180MPCMM0001 Chassis Management Module Software Technical Product Specification