Intel MPCMM0001 manual Command Line Interface CLI

The Command Line Interface (CLI)

Table 25. Dataitem Keywords for All Locations Except Chassis and System (Sheet 4 of 4)

Dataitem	Description	Get/Set	CLI Get Output	Valid Set Values
			Metallic Test Bus Pair #1:
			Token Owned: Yes/No
			Owner's IPMBAddress: IPMBAddress
			Metallic Test Bus Pair #2:
			Token Owned: Yes/No
			Owner's IPMBAddress: IPMBAddress
			Sync Clock Group #1:
			Token Owned: Yes/No
busedekeys	Get a list of Bused EKeys	Get	Owner's IPMBAddress: IPMBAddress	N/A
	and who owns them.
			Sync Clock Group #2:
			Token Owned: Yes/No
			Owner's IPMBAddress: IPMBAddress
			Sync Clock Group #3:
			Token Owned: Yes/No
			Owner's IPMBAddress: IPMBAddress
			where "Owner's IPMBAddress" is
			displayed when "Token Owned" is set to
			"Yes".
	Used to query the total
	number of FRUs in a
	particular location. Once the
	number of FRUs for the
totalfrus	location is known, the FRU	Get	integer number	N/A
	can be specified by the
	format "-l location:fru#". Not
	specifying the ":fru#" part will
	direct the command to FRU
	ID 0
	Get/Set the deactivation
	policy of the FRU. In PICMG
	3.0 ECN 1 this refers to the			1- Set the locked
	deactivation locked bit. The
		Both	1 - Locked bit is set	bit
frudeactivationpolicy	FRU can be specified by the
			0 - Locked bit is not set	0 - Clear the
	format “-l [location:fru#]. Not
				locked bit
	specifying the “:fru#” will
	direct the command to FRU
	0.
ipmicommand		Set	Command Response string on success	Command request
			or error code on failure.	string
			"Listing of raw format SEL log of the
			location. The listing is of the format:
	Used to list SEL in raw		<Entry1>\n\n<Entry2>…
rawsel		Get	Where :	N/A
	format.		<EntryM> is of the format: <Timestamp in
			Linux date
			format>\n\t<SensorName>\t<EventDescr
			iption>"

84MPCMM0001 Chassis Management Module Software Technical Product Specification