Intel MPCMM0001 manual Process Definition Section of pms.ini

Process Monitoring and Integrity

6.9.2.10Process Severity

An indicator for the importance of a given process. This severity will determine at what level SEL entries are generated and when reboots should occur on an active CMM.

Values: 1 = minor, 2 = major, 3 = critical. Default: 1.

ProcessSeverity = 1

6.9.2.11Recovery Action

This is the recovery action to take upon detection of a failed process.

Values: 1 = no Action, 2 = process restart, 3 = failover and process restart, 4 = failover and reboot.

Default: 1. (dynamic)

RecoveryAction = 1

6.9.2.12Process Restart Escalation Action

This determines the action to take if the RecoveryAction includes "process restart" and it fails.

Values: 1= no action, 2 = failover and reboot. Default: 1. (dynamic)

ProcessRestartEscalationAction = 1

6.9.2.13Process Restart Escalation Number

This is the number of process restarts that are allowed (within the interval specified below) before escalation starts.

Values: 1 - 255. Default: 5.

ProcessRestartEscalationNumber = 5

6.9.2.14Process Restart Escalation Interval

This is the interval in seconds at which the number of restarts will be limited (see above).

Values: 1 - 65535. Default: 900.

ProcessRestartEscalationInterval = 900

6.9.3Process Definition Section of pms.ini

The following sections describe and give examples of each of the process types that are defined in the pms.ini file.

6.9.3.1Shadow Process

Shadow process must exist to monitor "Monitor Process". Therefore this process should never have a recovery action of "no action".

58MPCMM0001 Chassis Management Module Software Technical Product Specification