Intel MPCMM0001 manual Target Parameter -t, PEM2

The Command Line Interface (CLI)

Table 21. Location (-l) Keywords

Keyword	Function
chassis	Chassis specific information.
	The system fantray where N is the number of the fantray. For example,
fantrayN	fantray1 refers to the single fantray in the MPCHC0001 shelf.
	NOTE: fantray1 may also be referred to as blade15 in a 14 slot chassis or
	blade17 in a 16 slot chassis.
	The system Power Entry Modules. PEM1 is in the left slot when looking
PEM1	from the front of chassis and PEM2 is in the right slot.
	NOTE: PEM1 may also be referred to as blade16 and PEM2 as blade17 in
PEM2
	a 14-slot chassis; correspondingly they can be referred to as
	blade18 and blade19 in a 16-slot chassis.

8.4.4Target Parameter: -t

The Target parameter is the sensor or variable that the cmmget or cmmset acts on. If target is not given then it is assumed that dataitem is an attribute of location. An example of this is presence. To obtain a list of valid targets for a device, issue the following command:

cmmget [-l location] -d listtargets

Where location is the device for which you want to obtain a list of targets.

The target parameter for plug-in boards and different chassis components is defined by the sensor name in the Sensor Data Record (SDR) for that device. The various boards, fantrays, and PEMs provide their own SDRs automatically.

78MPCMM0001 Chassis Management Module Software Technical Product Specification