Intel MPCMM0001 manual Blade#FruTargetTable/blade#FruTargetEntry

SNMP

Table 71. Blade#FruTargetTable/blade#FruTargetEntry (1.3.6.1.4.1.343.2.14.2.10.4.[1-16].53.1)

OID	Object	Syntax	Access	Value
1	b#FruNumber	INTEGER	none	Index 1
2	b#Target	DisplayString	none	Index 2
3	b#FruLedColorProps	DisplayString	read-only	Finds out what colors are supported
				by the LED.
4	b#FruLedState	DisplayString	read-write	Get/Set the FRU LED state.

Table 72. [FanTray/pem]Table/[fanTray/pem]Entry (1.3.6.1.4.1.343.2.14.2.10.[5/6].51.1)

OID	Object	Syntax	Access	Value
1	[fanTray/pem]Number	INTEGER	none	index
				Used to notify that a FRU has been
2	[fanTray/pem]FRUExtractionNotify	INTEGER	write	extracted from the shelf. Valid value:
				1
3	[fantray/pem]TotalFrus	DisplayString	read-only	Display the total number of FRUs.
4	[fanTray/pem]PICMGProperties	DisplayString	read-only	The version Information.
5	[fanTray/pem]DeviceID	DisplayString	read-only
				Used to find out if a location is
6	[fanTray/pem]Presence	INTEGER	read-only	present in the chassis. 0 - Not
				present, 1 - Present
				Used to find out what targets are
7	[fanTray/pem]ListTargets	DisplayString	read-only	available on a location (e.g., getting
				the list of sensors in the chassis).
8	[fanTray/pem]ListDataItems	DisplayString	read-only	Used to find out what data items are
				available on a target or location.
				Health information about a particular
9	[fanTray/pem]Health	INTEGER	read-only	location. This will be one of the
				following: (0-OK, 1-Minor, 2-Major, 3-
				Critical).
				Events that contribute to the health
10	[fanTray/pem]HealthEvents	DisplayString	read-only	of the location. This is a list of events
				happening on the location.
11	[fanTray/	DisplayString	read-write	Used to send any IPMI command to
	pem]IPMICommandRequest			this location.
12	[fanTray/	DisplayString	read-only	Used to read the response to the
	pem]IPMICommandResponse			above IPMI command.
13	fanTrayMinorLevel	DisplayString	read-write	The cooling to be used when at the
				minor level.
14	fanTrayNormalLevel	DisplayString	read-write	The cooling to be used when at the
				minor level.
15	fanTrayControl	DisplayString	read-write	The fantray's control mode.
16	fanTrayDefaultControl	DisplayString	read-write	The fantray's default control mode.
17	fanTrayRestoreDefaults	DisplayString	write-only	Restore the fantray's control mode to
				the default setting.
18	fanTrayMinimumSetting	DisplayString	read-only	The fantray's minimum setting.

MPCMM0001 Chassis Management Module Software Technical Product Specification 155