Intel MPCMM0001 manual CMM Ready Event, CMM Status Event Strings CMM Status

Redundancy, Synchronization, and Failover

3.7CMM Ready Event

The CMM Ready Event is a notification mechanism that informs the user when all CMM modules are fully up and running. The CMM is ready to process any request after receiving this event.

The CMM uses the "CMM Status" sensor when generating the CMM Not Ready event. Please refer to Table 46, “CMM Status Event Strings (CMM Status)” on page 118 for CMM status event strings.

Table 3. CMM Status Event Strings (CMM Status)

Event String	Event Code	Event Severity
“CMM is not ready.”	1024	Minor
“CMM is ready.”	1025	OK
“CMM is Active”	1026	OK
“CMM is Standby”	1027	OK
“CMM ready timed out”	1028	Minor

A CMM Not Ready Assertion SEL event is generated on a CMM when it transitions from standby mode to active mode during a failover or on the active CMM on power up. The event is only generated on the newly active CMM. The “CMM is Ready” event is generated after all CMM modules (board wrapper processes) are up and running and the SNMP daemon is active.

30MPCMM0001 Chassis Management Module Software Technical Product Specification