Intel MPCMM0001 manual Example CLI Commands Sheet 3

Example CLI Commands

Table 111. Example CLI Commands (Sheet 3 of 3)

Use Case	CLI Command	Return
	cmmset -l bladeN -d frucontrol -v [0-3]
	Where:
Exercise control over	0 = Cold reset	Success or Failure
the FRU payload	1 = Warm reset
	2 = Graceful reboot
	3 = Issue diag. Interrupt
Retrieve the device’s
hardware revision,
FW/SW revision, and	cmmget -l cmm -d deviceid	Refer to Section 8, “The Command
sensor and event
		Line Interface (CLI)” on page 71
interface command
spec revision
information
Query maximum FRU		Refer to Section 8, “The Command
Device ID supported	cmmget -l cmm -d picmgproperties
		Line Interface (CLI)” on page 71
by the IPM controller
Customize the OEM	cmmset -l cmm -d loginmessage -v “My CMM”	Success or Failure
login message
Customize the OEM	cmmset -l cmm -d cmdlineprompt -v “My CMM”	Success or Failure
command line prompt

MPCMM0001 Chassis Management Module Software Technical Product Specification 279