Intel MPCMM0001 manual Target Dataitem Lists, Dataitem Keywords for FantrayN Location

The Command Line Interface (CLI)

Table 29. Dataitem Keywords for FantrayN Location

dataitem	Description	Get/	CLI Get Output	Valid Set Values
		Set
				Any value between
minorlevel	Used to set or query the	Both		the normallevel and
	minorlevel for the fantray.			the majorlevel of the
				fantray.
				Any value between
normallevel	Used to set or query the	Both		the minimumsetting
	normallevel for the fantray.			and the minorlevel of
				the fantray.
				EmergencyShutdown
control	Used to set or query the control	Both		fantray
	mode of the fantray.			CMM
				defaultcontrol
	Used to set or query the			fantray
defaultcontrol	defaultcontrol mode of the	Both
				CMM
	fantray.
	Used to restore the cooling table
restoredefaults	defaults of the fan tray to the	Set	N/A	true
	vendor defaults or code defaults.
	Used to query the minimum
minimumsetting	setting of the fantray returned	Get		N/A
	via the getfantray properties
	IPMI command.
	Used to query the maximum
maximumsetting	setting of the fantray returned	Get		N/A
	via the getfantray properties
	IPMI command.
	Used to query the
	recommended setting of the
recommendedsetting	fantray returned via the	Get		N/A
	getfantray properties IPMI
	command.
currentfanlevel	Used to query the current	Get	0	N/A
	cooling level of the fantray.

8.4.5.2Target Dataitem Lists

When a target is specified, there is usually a slightly different set of dataitems specifically for that target. Refer to Section 8.4.4, “Target Parameter: -t” on page 78 for more information on the target parameter. Table 30 lists the possible dataitems used with various targets.

MPCMM0001 Chassis Management Module Software Technical Product Specification 93