Intel MPCMM0001 manual Sensor Targets Sheet 1, Sensor Target Description

Health Events

•Timestamp is in the format: [Day] [Month] [Date] [HH:MM:SS] [Year]. For example, Thu Dec 11 22:20:03 2003

•ChassisLocation is the chassis location information recorded in the chassis FRU.

•ChassisSN is the chassis serial number records in the chassis FRU.

•Location is the location where the sensor generating the event is located (i.e., CMM)

•SDR Sensor Name is the name given to the sensor in the Sensor Data Record (SDR).

•Health Event Strings are listed in Section 11.4, “List of Possible Health Event Strings” on page 108.

•Event Type is either “Assertion Event” or “Deassertion Event” stating whether it is an event that is being asserted or one that is being deasserted. This is not applied to threshold-based sensor events since the string already states event type.

•Event Code is a code unique to that event. The codes for each event can be found below in Table 11.4, “List of Possible Health Event Strings” on page 108.

11.2Sensor Targets

Available sensors for a location can be retrieved with the listtargets dataitem argument of the cmmget command. To view a list of sensor targets on the cmm using the listtargets command:

cmmget -l cmm -d listtargets

List of targets for the CMM can be found in Table 19, “Remote Procedure Calls (RPC)” on page 174.

For complete lists of sensors on other components (i.e., voltage sensors on blade1), refer to the corresponding Technical Product Specification for that product.

Table 33. Sensor Targets		(Sheet 1 of 2)
	Sensor Target		Description
	Brd Temp		Board Temperature Sensor
	CPU Temp		CPU Temperature Sensor
	FilterTrayTemp [1/2]		Filter Tray Temperature Sensor
	CPU Core V		CPU Core Voltage Sensor
	VBAT		Battery Sensor
	VTT DDR		VTT Sensor
	+2.5V		+2.5 Volt Sensor
	+3.3V		+3.3 Volt Sensor
	+5V		+5 V olt Sensor
	+12V		+12 Volt Sensor
	CDM [1/2]		CDM 1 or 2 Sensor

106MPCMM0001 Chassis Management Module Software Technical Product Specification