Intel MPCMM0001 manual #TotalFrus

SNMP

Table 68. Blade# Location (1.3.6.1.4.1.343.2.14.2.10.4.[1-16])

OID	Object	Syntax	Access	Value
12	b#TotalFrus	DisplayString	read-only	Displays the total number of FRUs
13	b#IPMICommandRequest	DisplayString	read-write	Used to send any IPMI command to this
				location.
14	b#IPMICommandResponse	DisplayString	read-write	Used to read the response to the above
				IPMI command.

Table 69. Blade#TargetTable/blade#TargetEntry (1.3.6.1.4.1.343.2.14.2.10.4.[1-16].51.1) (Sheet 1 of 2)

OID	Object	Syntax	Access	Value
1	b#Target	DisplayString	none	index
2	b#Current	DisplayString	read-only	The current value of a sensor.
3	b#ThresholdsAll	DisplayString	read-only	All thresholds of a sensor.
4	b#UpperCritical	DisplayString	read-only	Upper critical thresholds
5	b#UpperNonCritical	DisplayString	read-only	Upper non-critical thresholds
6	b#LowerNonCritical	DisplayString	read-only	Lower non-critical thresholds
7	b#LowerCritical	DisplayString	read-only	Lower critical thresholds
8	b#UpperNonRecoverable	DisplayString	read-only	Upper non recoverable thresholds
9	b#LowerNonRecoverable	DisplayString	read-only	Lower non recoverable thresholds
				Health information about a particular
14	b#SensorHealth	INTEGER	read-only	location/sensor. This will be one of the
				following: (0-OK, 1-Minor, 2-Major, 3-
				Critical).
				Events that contribute to the health of
15	b#SensorHealthEvents	DisplayString	read-only	the location/sensor. This is a list of
				events happening on the location.
16	b#MinorAction	OCTET	read-write	Used to configure user defined actions
		STRING		when minor events occur.
17	b#MajorAction	OCTET	read-write	Used to configure user defined actions
		STRING		when major events occur.
18	b#CriticalAction	OCTET	read-write	Used to configure user defined actions
		STRING		when critical events occur.
19	b#NormalAction	OCTET	read-write	Used to configure user defined actions
		STRING		when normal events occur.
20	b#fruBoardDescription	DisplayString	read-only	Used to read the Board Description
				from the FRU.
21	b#fruBoardManufacturer	DisplayString	read-only	Used to read the Board Manufacturer
				from the FRU.
22	b#fruBoardPartNumber	DisplayString	read-only	Used to read the Board Part Number
				from the FRU.
23	b#fruBoardSerialNumber	DisplayString	read-only	Used to read the Board Serial Number
				from the FRU.
24	b#fruBoardManufactureDate	DisplayString	read-only	Used to read the Board Manufacture
				Date from the FRU.

MPCMM0001 Chassis Management Module Software Technical Product Specification 153