Intel MPCMM0001 manual Dataitem Keywords for Chassis Location, MPCHC0001

The Command Line Interface (CLI)

Table 26. Dataitem Keywords for Chassis Location

dataitem	Description	Get/Set	CLI Get Output	Valid Set Values
				A numerical value
	Used to get or set the fan			between 0 and 100
				(i.e., “70”),
	speed of all fans in the
			The percentage of the max speed,	“localcontrol”, or
	chassis. Value is percent of
		Both	"Emergency Shut Down", or "Local	“emergencyshutdow
fanspeed	the maximum fan speed. See
			Control". For example, 80 for 80% of	n”
	Section 16, “Fan Control and
			the max speed.	(localcontrol is not
	Monitoring” on page 132 for
				supported on the
	more information.
				MPCHC0001
				chassis fan tray.)
	This is used to get or set the		"Shelf Address: <address>"
	Location field in the chassis		Where:	Location String less
	FRU and is sent out as a part		<address> is a space-separated list
location		Both		than 16 characters
	of SNMP and UDP alarts. This
			of two-digit, hex numbers if the	in length.
	is only used with the chassis
			address’ type/len byte is 0, decoded
	location.
			string otherwise

MPCMM0001 Chassis Management Module Software Technical Product Specification 85