Intel MPCMM0001 manual Blade# Location

SNMP

Table 67. CmmPmsTable/cmmPmsEntry (1.3.6.1.4.1.343.2.14.2.10.3.54.1) (Sheet 2 of 2)

OID	Object	Syntax	Access	Value
				The process escalation action defines how
4	cmmPmsEscalationActio	DisplayString	read-write	a faulty process that fails to restart will be
	n			recovered. Possible values: 1-No Action, 2-
				Failover and Reboot.
5	cmmPmsProcessName	DisplayString	read-only	Display the monitored process' name and
				its associated command line arguments.
				Display the operational state. An
				operational state of disabled indicates that
6	cmmPmsOpState	DisplayString	read-only	the process is faulty but cannot be
				recovered. Possible values: 1-Enabled, 2-
				Disabled.
				Health information about a particular
7	cmmPmsHealth	INTEGER	read-only	monitored process. Possible values: 0-OK,
				1-Minor, 2-Major, 3-Critical.
8	cmmPmsHealthEvents	DisplayString	read-only	Display the monitored process' health
				events.

Table 68. Blade# Location (1.3.6.1.4.1.343.2.14.2.10.4.[1-16])

OID	Object	Syntax	Access	Value
1	b#GrantedBoardEKeys	DisplayString	read-only	E keys
2	b#FRUExtractionNotify	INTEGER	write	Used to notify that a FRU has been
				extracted from the shelf. Value = “1”
3	b#PICMGProperties	DisplayString	read-only	The version Information.
4	b#DeviceID	DisplayString	read-only	Device ID
				The power state of a blade. This is used to
				find out if a blade is present, healthy, on/off
				or to reboot, shutdown and turn on a
6	b#Powerstate	INTEGER	read-write	blade. reset - Reset a blade poweron -
				Power on a blade poweroff - Power off a
				blade offline - Set the blade in the offline
				mode activate - set the board in active
				mode.
7	b#Presence	INTEGER	read-only	Used to find out if a location is present in
				the chassis. 0 - Not present, 1 - Present.
				Used to find out what targets are available
8	b#ListTargets	DisplayString	read-only	on a location (e.g., Getting the list of
				sensors in the chassis).
9	b#ListDataItems	DisplayString	read-only	Used to find out what data items are
				available on a target or location.
				Health information about a particular
10	b#Health	INTEGER	read-only	location. This will be one of the following:
				(0-OK, 1-Minor, 2-Major, 3-Critical).
				Events that contribute to the health of the
11	b#HealthEvents	DisplayString	read-only	location. This is a list of events happening
				on the location.

152MPCMM0001 Chassis Management Module Software Technical Product Specification