Intel MPCMM0001 manual PowerOn

The Command Line Interface (CLI)

Table 25. Dataitem Keywords for All Locations Except Chassis and System (Sheet 3 of 4)

Dataitem	Description	Get/Set	CLI Get Output	Valid Set Values
	Retrieves and sets power
	state of a blade.
	Get: This is used to find out
	the powered on/off or offline
	state of a blade
	Set: To reboot, shutdown and		"<location>: <currentState> (Mx)"	"Reset"
powerstate	turn on a blade	Both		"PowerOff"
	If “reset” is used on CMM		where Mx is the ATCA-defined M state of
				"PowerOn"
	location, the software will		the location
	check for redundancy and a
	reset will only occur if a
	redundant partner is
	identified.
	“PowerOff” is not supported
	on the CMM location.
	Used to find out if a particular		"<location> is <presenceState>."
			Where <presenceState> is
	location is occupied or
presence	present in the chassis. This	Get	"present" - if the location is present	N/A
	can be blades or intelligent		"not present" - if the location is not
	entities like fan trays or
			present or the CMM can not
	PEMs.
			communicate with it.
			"The FRU Power Level is <PwrLevel>
			Consuming <WattageValue> Watts"
presentpowerlevel	Get/Set the current power	Get	where	N/A
			<PwrLevel> is the current power level of
	level of a FRU.
			the FRU in the range 1-20
			<WattageValue> is the current power
			draw in watts
			Listing of the interpreted SEL log of the
			location. The listing is of the format:
sel	Returns the System Event	Get	“<Entry1>\n\n<Entry2>…”	N/A
			where <EntryM> is of the format:
	Log of the specified location.
			<Timestamp in Linux date
			format>\n\t<SensorName>\t<EventDescr
			iption>
			Base Interface Ekeys:
			<EkeyList>
			Fabric Interface EKeys:
			<EkeyList>
grantedboardekeys	Get the EKeys that have	Get	Update Channel Interface EKeys:	N/A
	been granted to the Board.		<EkeyList>"
			where <EkeyList> is a list of ekey
			settings for the interface such as
			Ekey1 : enabled
			EKey2 : disbaled
			EKey3 : no set

MPCMM0001 Chassis Management Module Software Technical Product Specification 83