Intel MPCMM0001 manual Ipmi Commands Supported by CMM Rmcp Sheet 1, Command Type Defined

RMCP

20.9IPMI Commands Supported by CMM RMCP

The following IPMI commands are supported via RMCP by the CMM. To configure privileges for the commands see Section 20.10, “Configuring IPMI Command Privileges” on page 196 below.

Table 89. IPMI Commands Supported by CMM RMCP (Sheet 1 of 3)

Command Type	Defined In	Command
IPMI Device Global	IPMI 1.5 Spec	Get Device ID
		Get Self Test Results
		Set BMC Global Enables
		Get BMC Global Enables
		Clear Message Flags
		Get Message Flags
		Get Message
		Send Message
		Get Channel Authentication Capabilities
		Get Session Challenge
		Activate Session
BMC Device and Messaging		Set Session Privilege Level
	IPMI 1.5 Spec	Close Session
Commands
		Get Session Info
		Get AuthCode
		Set Channel Access
		Get Channel Access
		Get Channel Info
		Set User Access
		Get User Access
		Set User Name
		Get User Name
		Set User Password
		Get Chassis Capabilities
Chassis Device Commands	IPMI 1.5 Spec	Get Chassis Status
		Chassis Control
		Get POH Counter
Event Commands	IPMI 1.5 Spec	Get Event Receiver
		Set Event Receiver

194MPCMM0001 Chassis Management Module Software Technical Product Specification