Nokia manual Managing M1112, Command, Set max-failure parameter value, Switch on/off IP cache

Managing M1112

Command	Set max-failure parameter value
Description	Defines how many times PPP options will be offered
	before the negotiation fails.
Syntax	[de] ppp max-failure <pkt-count>
Arguments	pkt-countis the number of packets, values 1...30.

Example

M1112(conf-common)#ppp max-failure 10

M1112(conf-common)#

Command	Switch on/off IP cache
Description	Switches IP cache on/off. Enabled IP cache increases
	the speed of the IP packet forwarding.
Syntax	[no] ip cache
Arguments	no switches IP cache off.

Example

M1112(conf-common)#

M1112(conf-common)#

Command	Add/delete IP route
Description	Adds/deletes an IP route
Syntax	[no] ip route <dest-net> <net-mask> <gateway> <if>
Arguments	no deletes an IP route.
	dest-netis the IP address of the destination in the
	dotted decimal notation.
	net-maskis the subnet mask of the destination in
	dotted decimal notation.
	gateway is the default gateway for the route.
	if is the interface through which the destination can be
	reached, vbridge or mngtvcc.

Example

M1112(conf-common)#ip route 131.112.11.1 255.255.255.0 131.2.111.2 mngtvcc M1112(conf-common)#

C33907001SE_00 E Copyright Nokia Networks Oy 5-59