Nokia manual Managing M1112, Command, Switch on/off IP function in vbridge

Managing M1112

Vbridge commands

Command	Switch on/off IP function in vbridge
Description	Switches on/off IP function.
Syntax	[no] ip address <ip-address> <ip-mask>
Arguments	no switches off IP function.
	ip-addressis the IP address of the Vbridge in dotted
	decimal notation.
	ip-maskis the subnet mask in dotted decimal nota-
	tion.

Example

M1112(conf-vbridge)#ip address nnn.nnn.nnn.nnn 255.255.255.0

M1112(conf-vbridge)#

Command	Switch on/off RIP receive function in vbridge
Description	Switches on/off RIP receive function. When enabled,
	M1112 receives Routing Information Protocol mess-
	ages from other routers.
Syntax	[no] ip rip-receive {rip-receive-mode}
Arguments	no switches RIP receive function off.
	v1 receive-mode selects RIP version 1.
	v2 receive-mode selects RIP version 2.
	both-v1v2receive-mode selects both RIP version 1
	and version 2.

Example

M1112(conf-vbridge)#ip rip-receive v1

M1112(conf-vbridge)#

Command

Disable/enable management through the vbridge

Description

Enables/disables the management of M1112 through the vbridge.

Syntax	[no] ip admin-disabled
Arguments	no enables management through the ATM channel.
Example

M1112(conf-vbridge)#ip admin-disabled

M1112(conf-vbridge)#

C33907001SE_00 E Copyright Nokia Networks Oy 5-55