Nokia M1112 manual Use CLI to issue, Downloading configuration or application from monitor

Managing M1112

1. Use CLI to issue

install tftp:/<ip-address>/Gx1x2200.R00 command, where <ip-address is the IP address of the TFTP server containing the new software and Gx1x2200.R00 is the name of the file to be downloaded. The command copy tftp:/<ip-address>/Gx1x2200.R00 image.exe can be used alternatively.

2. After you will see transfer status SUCCESSFUL message, restart M1112 to activate the new software.

Downloading configuration or application from monitor

Monitor is a small application that is executed before the actual software image is started. Typically the Monitor automatically loads the application file image.exe. You can activate the Monitor by pressing “m” followed by “o” in the very beginning of the system startup:

local MAC=00:40:43:02:36:72; Using M111/850 eth conf Type ’m’ (fast) followed by ’o’ (in 10 sec) to activate Monitor

Nokia Networks (C) 1999

Nokia Boot

B-R0.0.0. built on Apr 4 2000 11:27:55

MON>

The following commands are available for file handling in the Monitor:

Drename

Ddelete

Ddir

M1112 has two methods of retrieving files:

DTFTP

DXMODEM

You can retrieve files from a TFTP server using the commands in the following example:

MON>ipa 192.168.1.1

ip=192.168.1.1

ipserver=0.0.0.0

ipgw=0.0.0.0

serverfile=

MON>ips 192.168.1.100

C33907001SE_00 E Copyright Nokia Networks Oy 5-7