Nokia manual M1112 Administrator Manual, Command, ATMping, Switch off debug

M1112 Administrator Manual

Command	ATMping
Description	Sends five OAM F5 loopback cells to the specified VPI/
	VCI destination with a 5 second total timeout interval.
	You can use ATMping to test the ATM connection.
Syntax	atmping <vpi> <vci> <range>
Arguments	vpi is the Virtual Path Identifier and vci is the Virtual
	Channel Identifier of the ATM channel you want to test.
	vpi values are integers (0...255).
	vci values are integers (0...65535)
	range values are segment and end-to-end depend-
	ing whether you want to test the first segment of the
	ATM connection or the end-to-end connection.

Example

M1112> atm ping 0 23 segment

reply asserted roundtrip time = 4.20 ms M1112>

The debug commands are used to solve difficult problem situations. The debugging can be switched off with the following command. Other debugging commands are not handled in this manual.

Command

Switch off debug

Description

Switches all debug operations off. To quit debugging, write no debug all on the screen regardless of what is being printed on the screen.

Syntax	no debug all
Arguments	no switches debugging off.
Example

M1112> no debug all

M1112>

5-38 E Copyright Nokia Networks Oy C33907001SE_00