Nokia manual Managing M1112, Command Show ATM status, Command Show bridge interface status

	Managing M1112
Command	Show ATM status
Description	Displays ATM status.
Syntax	show atm [all]
Arguments	show atm command shows active ATM channels and
	traffic statistics.
	all shows all ATM information.

Example
M1112> show atm
##vcc1(up)	vpi	vci	type	encap
	0	35	DATA_PVC	ETH-LLC
		pkt	oct	dis	err
stat-tx-payload		223641 2568289 0			0
stat-rx-payload		18030	1440816 0		0
M1112>
Command	Show bridge interface status
Description	Displays interfaces which have bridging enabled.
Syntax	show bridge if
Arguments	None
Example
M1112> show bridge if
VBRI (up)	phys-address
	00:99:12:16:10:53
ETH (up)	phys-address
	00:00:00:00:00:00
VCC1 (up)	phys-address
	00:00:00:00:00:00
M1112>

C33907001SE_00 E Copyright Nokia Networks Oy 5-25