Nokia manual M1112 Administrator Manual, Command, Switch on/off bridging

M1112 Administrator Manual

Ethernet level commands

Command	Switch on/off bridging
Description	Switches on/off bridging.
Syntax	[no] bridging
Arguments	no switches bridging off.

Example

M1112(conf-eth)#bridging

M1112(conf-eth)#

Command	Switch on/off IP function in Ethernet interface
Description	Switches on/off IP function in the Ethernet interface.
Syntax	[no] ip address <ip-address> <ip-mask>
Arguments	no switches IP function off.
	ip-addressis the IP address you want to assign to
	the Ethernet interface.
	ip-maskis the subnet mask.
Example

M1112(conf-eth)#ip address 192.168.132.11 255.255.255.0

M1112(conf-eth)#

Command

Switch on/off RIP send function in Ethernet inter- face

Description

Switches on/off RIP send function. When enabled M1112 sends Routing Information Protocol messages to other routers.

Syntax	[no] ip rip-send {rip-send-mode}
Arguments	no switches rip-send function off.
	v1 send-mode selects RIP version 1.
	v2 send-mode selects RIP version 2.
	compatible-v1send-mode selects the sending of
	RIPv2 packets using broadcast.

Example

M1112(conf-eth)#ip rip-send v1

M1112(conf-eth)#

5-48 E Copyright Nokia Networks Oy C33907001SE_00