Nokia M1112 manual LAN interface, Route/tunnel IP, bridge all other including IP

M1112 Administrator Manual

LAN interface	ATM VCC interfaces	Vbridge
		(gateway/host inter-
		face)
Route/tunnel IP, bridge all other traffic
Routing (IP address	VCCs that only route	Typically not used in
configured) and bridg-	or tunnel have routing	this case. The unit
ing activated.	(IP address confi-	can be managed lo-
	gured) or PPTP local	cally through the LAN
	tunneling activated.	interface and remote-
	VCCs that both bridge	ly through a separate
	and route have addi-	management VCC or
		the ATM VCCs which
	tionally bridging acti-
		have routing acti-
	vated. This requires
		vated.
	ETH-LLC encapsula-
	tion to be used on
	those VCCs.
	VCCs that only bridge
	have only bridging
	activated.
Route/tunnel IP, bridge all other including IP
Bridging activated	VCCs that only route	Used as an IP gate-
	or tunnel have routing	way interface for LAN
	(IP address confi-	interface.
	gured) or PPTP local
	tunneling activated.
	VCCs that only bridge
	have only bridging
	activated.

Table 2-1Operational modes

LAN interface

LAN interface can be configured individually to bridge and route packets. There are three different operational modes in the LAN interface:

DBridging only; only bridging is activated in the interface. In this case the interface bridges all protocols.

DRouting only; only IP address is configured in the interface. In this case, the interface routes IP packets.

DBridging and routing; Bridging is activated in the interface and IP address is configured in the interface. In this case, the interface routes IP packets and bridges all other packets.

2-6 E Copyright Nokia Networks Oy C33907001SE_00