M1112 Administrator Manual
The command line interface has been divided into two modes: main and configuration. The main mode lets you monitor the status and performance of M1112. The configuration mode lets you change M1112 configuration. The CLI is case sensitive. All commands must be given in lower case characters. Only file names and strings can contain upper case characters.
In the configuration mode, functions can be activated by typing the corresponding command, for example bridging. The function can be deactivated by simply typing no bridging. In commands which require typing in parameter values, the default value can be restored by typing de ppp mru, for example. de in front of the command means “default”. If you type in a value which is incorrect (for example, letters instead of numbers), the CLI prompts you to enter the value correctly and displays help. You can always get help on the command or display by typing help or ? at the command prompt.
You can recall you previous commands by pressing the
The configuration mode has been divided into levels. You can navigate through the configuration mode by typing the name of the level. By typing exit you will return to the main mode. top command returns you to the root level of the configuration mode (M1112(conf)#).
The configuration mode levels are:
Dsystem
Dpassword
Deth
Dvcc1, vcc2, vcc3, vcc4, vcc5, vcc6, vcc7, and vcc8
Dvbridge
Dmngtvcc
Dcommon.
The example below shows how to access the different levels:
M1112>
M1112>conf
M1112(conf)#system
E Copyright Nokia Networks Oy | C33907001SE_00 |
