Nokia M1112 manual Command Switch on/off IP function on ATM channel

M1112 Administrator Manual

Command	Stop PPP negotiation when authentication failure
	occurs
Description	When enabled, the athentication failure causes the
	PPP negotiation to stop. The command reset ppp
	vccx is required to restart the PPP negotiation.
Syntax	[no] ppp autostop
Arguments	no disables PPP autostop.

Example

M1112(conf-vccx)#ppp autostop

M1112(conf-vccx)#

Command	Switch on/off IP function on ATM channel
Description	Switches on/off IP function on the ATM channel.
Syntax	[no] ip address <ip-address> <ip-mask>
Arguments	no switches IP function off.
	ip-addressis the IP address you want to assign to
	the ATM channel. IP address 0.0.0.0 with subnet mask
	0.0.0.0 can be used with ppp-vc encapsulation if the
	dynamic IP address negotiation is required.
	ip-maskis the subnet mask.

Example

M1112(conf-vccx)#ip address 192.168.132.13 255.255.255.0

M1112(conf-vccx)#

Command	Switch on/off RIP send function on ATM channel
Description	Switches on/off RIP send function. When enabled,
	M1112 sends Routing Information Protocol messages
	to other routers.
Syntax	[no] ip rip-send {rip-send-mode}
Arguments	no switches rip-send function off.
	v1 send-mode selects RIP version 1.
	v2 send-mode selects RIP version 2.
	compatible-v1send-mode selects the sending of
	RIPv2 packets using broadcast.

Example

M1112(conf-vccx)#ip rip-send v1

M1112(conf-vccx)#

5-52 E Copyright Nokia Networks Oy C33907001SE_00