Nokia manual M1112 Administrator Manual, Command, Show DSL line status

M1112 Administrator Manual

Command	Show DSL line status
Description	Displays DSL line status
Syntax	show dsl [all]
Arguments	all

Example

M1112> show dsl

hardware-type	ALCATEL/DMT
hardware-rev	99111601/ISDN/CP
firmware-rev	00002508
activity-statusOPER/FULL
	near-end	far-end
maximum-bitrate5696kbits		448kbits
actual-bitrate4608kbits		416kbits
noise-margin	3.5dB	0.0dB
output-power	12.0dBm	20dBm
attenuation	48.5dB	0.0dB
corr-fast-fec	0	0
corr-intl-fec	47	0
fail-fast-crc	0	0
fail-intl-crc	0	0
fail-fast-hec	0	0
fail-intl-hec	0	658
flaged-alarms	NONE	NONE
M1112>

Command	Show Ethernet interface status
Description	Displays Ethernet interface status
Syntax	show eth [all]
Arguments	show eth command shows Ethernet interface state
	and status.
	all argument shows also interrupts.
Example
M1112> show eth
##eth(up)	type
	IEEE 802.3/DIX
	pkt	oct	dis	err
stat-tx-payload 10964		672919	0	0
stat-rx-payload 10968		657690	0	0
M1112>

5-24 E Copyright Nokia Networks Oy C33907001SE_00