Nokia manual Managing M1112, Routing/tunneling IP, bridging all protocols including IP

Models: M1112

1 109
Download 109 pages 14.16 Kb
Page 38
Image 38
5.1.3Routing/tunneling IP, bridging all protocols including IP

Managing M1112

for all relevant interfaces. The result is that IP packets will be routed and all other packets will be bridged. In the configuration example below, LAN interface routes IP traffic and bridges all other protocols. ATM VCC1 routes IP traffic and ATM VCC2 interfaces bridges all traffic.

M1112> show config running eth

ip address 192.168.1.1 255.255.255.0 bridging

vcc1

pvc 0 101 ip-llc

ip address 10.98.16.1 255.255.255.0 vcc2

pvc 0 102 eth-llc bridging

M1112>

5.1.3Routing/tunneling IP, bridging all protocols including IP

When IP packets that are received from LAN must be routed/tunneled to some ATM VCC and bridged to some other ATM VCC, then the VBRIDGE interface must be used as this common IP interface for all bridged interfaces. LAN interface is in this case configures as bridge only.

M1112> show config running eth

bridging vcc1

pvc 0 101 ip-llc

ip address 10.98.16.1 255.255.255.0 vcc2

pvc 0 102 tunneled-ppp-vc vcc3

pvc 0 103 eth-llc bridging

vbridge

ip address 192.168.1.1 255.255.255.0 M1112>

C33907001SE_00

E Copyright Nokia Networks Oy

5-3

Page 38
Image 38
Nokia manual Managing M1112, Routing/tunneling IP, bridging all protocols including IP