6.5 EXPLANATION OF THE RFID RELATED COMMANDS
6.5.1 RFID TAG POSITION ADJUSTMENT COMMAND | [ESC] @003 |
Function
Sets the feed amount to adjust the RFID tag position before writing data onto it.
If the RFID tag is not positioned just above the RFID antenna when the paper is at the print start position, the printer automatically feeds the paper forward or backward by the specified amount to write data onto the RFID tag prior to printing.
Also, specifies the offset printing function which enables printing and writing data on
Format
Term
Explanation
[ESC] @003; abbbb(, c) [LF] [NUL]
a:Feed direction +: Backward −: Forward
bbbb: Feed amount
0000 to 9999 (In units of 0.1 mm)
c:Offset printing (Omissible)
0:Offset printing is not performed (normal operation). (Default)
1:Offset printing is performed without a reverse feed of the first label.
2:Offset printing is performed with a reverse feed of the first label.
(1)The printer automatically feeds paper forward or backward before writing data onto the RFID tag as specified in this command. After that, the printer returns the paper to the print start position for printing.
(2)Only the value of −30 or less, or +30 or more becomes effective.
(3)When the head up function has been enabled, it will be performed when the feed amount is set to −50 or less, or +50 or more .
(4)Transmitting the Image Buffer Clear Command clears the settings of this command.
(5)This command is ignored for
(6)The offset printing is a function that the printer prints on a label while writing data onto the tag of a next label. This is useful to continuously issue multiple RFID labels.
When using approx.
1)is at the print position. In this case, enabling the offset printing eliminates a need for a reverse feed to the tag write position, causing the total throughput to increase.
Feed
direction
Print head
Label 1
Label 2
Label 3
RFID Antenna
Label 4
