Toshiba B-SX4T-GS20-QM-R manual Writable character set 44 48×48 dots

(11) Writable character set: 44 (48×48 dots)

Character width 48 dots

Character

height

48 dots

4	4	4	4	4	4	4	4	4	4	4	4
	8		8	8		8			8		8

Nibble mode

1	30H	2	30H	3	30H	4	30H	5	30H	6	30H
7	30H	8	30H	9	30H	10	30H
						•
						•
						•
						•
						•		569	30H 570		30H
571	30H 572 30H			573 30H		574	30H 575		30H 576		30H

Nibble mode

1	00H	2	00H	3	00H	4	00H	5	00H	6	00H
7	00H	8	00H	9	07H	10 E0H
						•
						•
						•
						•
						•		281	00H 282		00H
283	00H 284 00H			285 00H		286	00H 287		00H 288		00H

[Nibble mode]

(1)The writable character data to be stored is separated into four dot units and sent in the following order (1 → 576). (High order digit: “3”)

(2)The data of writable characters to be stored is 30H to 3FH.

(3)The data count of writable characters to be stored should be 576 bytes.

[Hex. mode]

(1)The writable character data to be stored is separated into eight dot units and sent in the following order (1 → 288).

(2)The data of writable characters to be stored is 00H to FFH.

(3)The data count of writable characters to be stored should be 288 bytes.

*When writable character 44 is designated, the width and height of the character are both 48 dots.

- 207 -