Toshiba B-SX4T-GS20-QM-R manual English German French Dutch Spanish Japanese Italian

g:RS-232C transmission control

0: XON/XOFF protocol

(No XON output when the power is turned on, no XOFF output when the power is turned OFF)

1: READY/BUSY (DTR) protocol

(No XON output when the power is turned on, no XOFF output when the power is turned OFF)

2: XON/XOFF + READY/BUSY (DTR) protocol:

(XON output when the power is turned on, XOFF output when the power is turned OFF)

3: XON/XOFF protocol:

(XON output when the power is turned on, XOFF output when the power is turned OFF)

4: RTS protocol

(No XON output when the power is turned on, no XOFF output when the power is turned OFF)

h:Language for LCD messages

0:ENGLISH

1:GERMAN

2:FRENCH

3:DUTCH

4:SPANISH

5:JAPANESE

6:ITALIAN

i:Forward feed standby after an issue

0:OFF (Not performed)

1:ON (Performed)

j:Fine adjustment direction for the stop position of the forward feed standby +: Increase the length of the forward feed

-: Decrease the length of the forward feed

kk:Fine adjustment value for the stop position of the forward feed standby 00 to 50 (in units of 0.1 mm, in steps of 0.5 mm) (*1)

l:Head-up operation in the cut issue mode, or the use of the rewinder in the batch issue mode.

0:OFF (Head-up operation is not performed/the rewinder is not used.)

1:ON (Head-up operation is performed/the rewinder is used.)

m:Ribbon saving system

0:OFF (Not used)

1:ON (Head lever position is “TAG”)

2:ON (Head lever position is “LABEL”)

n:Type of control code

0:Automatic selection

1:ESC, LF, NUL mode

2:{, , } mode

3:Any set code mode

- 240 -