Toshiba B-SX4T-GS20-QM-R manual

~In the case of RFID (Data read)

Function

Reads an RFID tag which is positioned above the antenna. When the feed amount has been set by the RFID Tag Position Adjustment Command ([ESC] @003) for adjusting an RFID tag position, the specified amount of the media is fed forward or backward before reading the RFID data. The read RFID data is transmitted included in an RFID read terminate status after printing is completed.

Format

Term

c[ESC] XBaa; bbbb, cccc,d (,Neeee) (,Afff) (,Tgg) (,Ih) (,Jiiiiiiii) (,Xjkkkkkkkk · · ·) [LF] [NUL]

aa:Bar code number 00 to 31

bbbb:Parameter not referred to

Fixed to 4 digits (in 0.1 mm units)

cccc:Parameter not referred to

4 or 5 digits (in 0.1 mm units)

d:Type of bar code

r:RFID (data read)

Neee:	Number of bytes to be read (Omissible)
	0001 to 4096
	When omitted, the number of bytes specified for the tag type being used will
	be designated.
Afff:	Address where the data is read (Omissible)
	000 to 999
	Designates the address where data starts to be read.
	When omitted, this parameter will be set to 18 for ISO18000-6B tag, or 0 for
	other tag types.
Tgg:	Tag type (Omissible)
	00: None
	11: I-Code
	12: Tag-it
	13: C220
	14: ISO15693
	15: C210
	16: C240
	17: C320
	21: EPC Class 0
	22: EPC Class 1
	23: ISO 18000-6B
	24: EPC Class 1 Generation 2

Designates the type of RFID tag from which data is to be read.

When omitted, the tag type set in the system mode will be designated.

In accordance with the tag type designated by this setting, the tag type set in the system mode changes.

When “00: NONE” is designated, the backed up tag type will be designated, and the system mode setting will not be changed.

- 115 -