C: Stored PC command save file

SOH

STX

“C”

Slot

Stored PC command save file name

ETX

EOT

CR

LF

01H

02H

43H

xxH

File name 1 00H File name 2 00H ··· File name n

03H

04H

0DH

0AH

 

 

 

 

00H

 

 

 

 

Note

 

 

File name (including extension):

Slot:

“00H” should be placed between file

“1” (31H): Slot 1

names.

“2” (32H): Slot 2

 

In the following cases, 1 byte of “00H” is returned as the stored PC command save file name.

cThere is no file.

dThe ATA card has not been inserted in the specified slot.

(2)This command is one of the command types that are processed as they are received. Processing takes place starting from the ones received first. Until the process of the command previously sent is completed, this command is not processed. Therefore, if the printer is not in the idle state when this command is sent, the information data may not be returned immediately.

(1) This command is effective only for the serial interface (RS-232C).

- 231 -

Page 235
Image 235
Toshiba B-SX4T-GS20-QM-R manual Stored PC command save file name, File name including extension, Names