Toshiba B-SX4T-GS20-QM-R manual

~In the case of GS1 DataBar

Format

Term

c[ESC] XBaa; bbbb, cccc, d, e, ff, g, hhhh (, ijjjjjjjjjj, kk) (, Sll) (= sss ------ sss) [LF] [NUL]

d[ESC] XBaa; bbbb, cccc, d, e, ff, g, hhhh (, ijjjjjjjjjj, kk) (, Sll) (; tt1, tt2, tt3, ------, tt20) [LF] [NUL]

aa:Bar code number 00 to 31

bbbb:Print origin of X-coordinate of the bar code Fixed as 4 digits (in 0.1 mm units)

cccc:Print origin of Y-coordinate of the bar code 4 or 5 digits (in 0.1 mm units)

d:Type of bar code

b:GS1 DataBar family

e:Version (Type of GS1 DataBar)

1:GS1 DataBar Omnidirectional/GS1 DataBar Truncated

2:GS1 DataBar Stacked

3:GS1 DataBar Stacked Omnidirectional

4:GS1 DataBar Limited

5:GS1 DataBar Expanded

6:GS1 DataBar Expanded Stacked

ff:1-module width

01 to 15 (in dots)

g:Rotational angle of bar code

0:0°

1:90°

2:180°

3:270°

hhhh:Height of the bar code

0000 to 1000 (in 0.1 mm units)

In the case of GS1 DataBar Truncated, set a value obtained by multiplying one module width by 13.

ijjjjjjjjjj: Increment/decrement

(Omissible. If omitted, incrementing/decrementing is not performed.)

i:Indicates whether to increment or decrement +: Increment

-: Decrement

jjjjjjjjjj:Skip value

0000000000 to 9999999999

kk:No. of zeros to be suppressed

(Omissible. If omitted, the zero suppression process is not performed.) 00 to 20

ll:Segment width (Omissible. When omitted, “04” is specified.)

02 to 22 (Even number only. Specifying an odd number causes a command error.)

This parameter is effective only for GS1 DataBar Expanded Stacked. (Version (type of GS1 DataBar): 6)

Setting this parameter to ”22” makes the symbol look similar to the GS1 DataBar Expanded.

- 99 -