6.3.20 ATA CARD FORMAT COMMAND | [ESC] JA |
Function
Format
Term
Formats (initializes) the ATA card for storage.
[ESC] JA; a [LF] [NUL]
a:Drive
Explanation
Refer to
1:Slot 1 on the PCMCIA board (Option)
2:Slot 2 on the PCMCIA board (Option)
(1)Only up to
(2)When performing the label issue operation is performed after the ATA Card Format Command is sent, the image buffer is automatically cleared.
(3)When storing of writable characters, logos, or PC interface commands is not continued, the printer automatically enters the online mode (label issue operation) after about 10 seconds. In this case, the image buffer is automatically cleared.
(4)Before the ATA card is formatted, the Web printer function should be set to OFF.
•Bit Map Writable Character Command ([ESC] XA)
•Save Start Command ([ESC] XV)
•Save Terminate Command ([ESC] XP)
Example
[ESC] JA; 2 [LF] [NUL]
- 196 -
