Toshiba B-SX4T-GS20-QM-R manual Writable character set 42 24×24 dots, Hex. mode

(9)Writable character set: 42 (24×24 dots )

Character width 24 dots

Character

height

24 dots

Nibble mode

1	30H	2	30H	3	30H	4	30H	5	30H	6	30H
7	30H	8	30H	9	33H
						•
						•
						•
						•
						•		137	30H	138	30H
139	30H	140	30H	141	30H	142	30H	143	30H	144	30H

							Hex. mode
4	4	4	4	4	4	1	00H	2	00H	3	00H
						4	00H	5	3CH	6	00H
8			8		8				•
									•
									•
									•
						67	00H	68	3CH	69	00H
						70	00H	71	00H	72	00H

[Nibble mode]

(1)The writable character data to be stored is separated into four dot units and sent in the following order (1 → 144). (High order digit: “3”)

(2)The data of writable characters to be stored is 30H to 3FH.

(3)The data count of writable characters to be stored should be 144 bytes.

[Hex. mode]

(1)The writable character data to be stored is separated into eight dot units and sent in the following order (1 → 72).

(2)The data of writable characters to be stored is 00H to FFH.

(3)The data count of writable characters to be stored should be 72 bytes.

*When writable character 42 is designated, the width and height of the character are both 24 dots.

- 205 -