Toshiba B-SX4T-GS20-QM-R manual Cut position Head position

[C: Batch mode (Cut interval: 1, Issue count: 2)]

•“Automatic forward feed standby” is set to ON in the system mode.

•The rotary cutter is used.

Cut position Head position

A

B

A

A B

B

B

B

(1)Idling (during the forward feed standby)

(2)Feeds back to the home position.

(3)Completes printing the 1st label (A).

(4)Starts printing the 2nd label (B).

(5)The 1st label (A) reaches the cut position and is cut.

(6)Completes printing the 2nd label (B).

(7)Feeds the 2nd label (B) to the cut position.

(8)The 2nd label (B) reaches the cut position and is cut.

(9)Since non-stop cutting is performed, paper is fed and stopped over the cut position.

(10)Feeds back to the home position.

(11)After 1 second, performs 13.7-mm automatic forward feed.

- 170 -