Toshiba B-SX4T-GS20-QM-R manual Rfid Error

8.6 RFID ERROR

(1)RFID Write Error

If writing data onto the RFID tag continuously failed for the maximum number of RFID write retries, an RFID write error will result. (The maximum number of RFID write retries can be set in the system mode.)

*When an error has occurred, the printer shows an error message, sends a status response, and then stops. Only the Status Request Command and the Reset Command can be processed. Other commands are not processed. Restoration using the [RESTART] key is possible. (The printer resumes printing the label at which the error had occurred.)

(2)RFID Error

If a problem has occurred when the printer communicates with the RFID module, an RFID error will result.

- 266 -