Toshiba B-SX4T-GS20-QM-R manual BIT MAP Writable Character Command For Flash Memory ESC XD

6.3.22 BIT MAP WRITABLE CHARACTER COMMAND (For Flash Memory) [ESC] XD

Function

Format

Term

Writes writable characters and logos in the flash memory card or flash ROM on the CPU board.

[ESC] XD; (Sj, ) aa, b, ccc, ddd, eee, fff, ggg, h, iii ------		iii [LF] [NUL]
Sj:	Drive in which writable characters or logos are stored
	(Omissible. If omitted, flash ROM on the CPU board is selected.)

j:Drive

0:Flash ROM on CPU board

1:Slot 1 on the PCMCIA board (Option)

2:Slot 2 on the PCMCIA board (Option)

aa:Writable character set

•Flash memory card 01 to 40

41 16 × 16 dots

42 24 × 24 dots

43 32 × 32 dots

44 48 × 48 dots

•Flash ROM on the CPU board 01 to 40

41 16 × 16 dots

42 24 × 24 dots

43 32 × 32 dots

44 48 × 48 dots

51 2-byte code character

b(b): Writable character code 20H to FFH (Set in hex.)

40H to 7EH, 80H to FCH (When the writable character set is 41 to 44) 2020H to FFFFH (When the writable character is 51.)

ccc:Left offset

000 to 719 (in dots)

ddd:Top offset

000 to 719 (in dots)

eee:Character width

001to 720 (in dots)

fff:Character height

001to 720 (in dots)

ggg:Horizontal spacing/proportional spacing

000to 999 (in dots)

h:Type of writable character data

0:Nibble mode (4 bits/byte)

1:Hex. mode (8 bits/byte)

iii --- iii: Writable character data to be stored

*If each parameter for left offset, top offset, character width, character height, and horizontal spacing/proportional spacing is fixed as “000”, the setting is ignored when the writable character set is 41 to 44.

- 198 -