Toshiba B-SX4T-GS20-QM-R manual Cut position Head position

[C: Batch mode (Cut interval: 1, Issue count: 2)]

•“Automatic forward feed standby” is set to ON in the system mode.

•The swing cutter is used.

Cut position Head position

A

A

A

B

B

B

(1)Idling (during the forward feed standby)

(2)Feeds back to the home position.

(3)Completes printing the 1st label (A).

(4)Feeds the 1st label (A) to the cut position.

(5)Cuts the 1st label (A).

(6)Feeds back to the home position.

(7)Completes printing the 2nd label (B).

(8)Feeds the 2nd label (B) to the cut position.

(9)Cuts the 2nd label (B).

(10)Feeds back to the home position.

(11)After 1 second, performs 13.7-mm automatic forward feed.

- 168 -