Toshiba B-SX4T-GS20-QM-R manual Graphic Command ESC SG

6.3.24 GRAPHIC COMMAND [ESC] SG

Function

Draws graphic data.

Format

Term

[ESC] SG; aaaa(D), bbbb(D), cccc, dddd, e, ggg --- ggg [LF] [NUL] or

[ESC] SG0; aaaa(D), bbbb(D), cccc, dddd, e, ffff, ggg --- ggg [LF] [NUL]

aaaa(D): Print origin of X-coordinate for drawing graphic data Fixed as 4 digits (in 0.1 mm units)

*If “D” is attached after a 4-digit value, the coordinate is specified in dots. 0000D ~

bbbb(D): Print origin of Y-coordinate for drawing graphic data 4 or 5 digits (in 0.1 mm units)

*If “D” is attached after a 4- or 5-digit value, the coordinate is specified in dots.

0000D ~

cccc:No. of graphic width dots

Fixed as 4 digits (in dots)

However, when the graphic data “2: BMP file” or “6: PCX file” is selected, this designation is ignored. (The information of the graphic width is contained in the graphic data.)

dddd:No. of graphic height dots 4 or 5 digits (in dots)

However, when the graphic data “2: BMP file” or “6: PCX file” is selected, this designation is ignored. (The information of the graphic width is contained in the graphic data.)

When “3: TOPIX compression mode” is selected for the type of graphic data:

	Resolution of graphic data:	*only two types
	0150: 150 DPI (The data is drawn in double resolution.)
	0300: 300 DPI (The data is drawn in single resolution.)
e:	Type of graphic data
	[ESC] SG; -- command:
	0: Nibble mode (4 dots/byte)	Overwrite drawing
	1: Hex. mode (8 dots/byte)	Overwrite drawing
	2: BMP file mode	Overwrite drawing
	3: TOPIX compression mode	Overwrite drawing
	4: Nibble mode (4 dots/byte)	OR drawing
	5: Hex. mode (8 dots/byte)	OR drawing
	6: PCX file mode	Overwrite drawing
	7: TOPIX compression mode	XOR drawing
	[ESC] SG0; -- command:
	A: Printer driver compression mode		Overwrite drawing

- 210 -